FIRST PRESS

Transformer, valve or transistor. Three preamp circuits.

Three original preamp circuits on the way in: Transformer, Valve and Transistor. Drive, Tone, Output and Mix.

Free

Free to keep with a Fat Berry account. Windows VST3 · macOS VST3 and AU.

No card · Free to keep · Up to 3 computers · Free updates

Hear it first ↓

Hear it

Press Play to hear it. Switch between Before and After while it plays.

0:00 / 0:00

A dry guitar and the Transformer circuit in FIRST PRESS.

After selected.

How it is built

Pick a circuit and set Drive from 0 to 30 dB. In the editor, a Drive move trims Output by the same amount, so you hear the colour instead of the level. Tone is a tilt around 700 Hz, from -6 to +6 dB. Mix blends the dry signal back in, and the default is fully wet. Changing circuit crossfades over 40 ms.

Three preamp circuits

Transformer, Valve and Transistor are separate original circuits: a loaded magnetic core, a common-cathode valve stage, and a common-emitter transistor stage.

The switch is a three-position selector. A circuit change blends over 40 ms.

Specs and compatibility

Install on Windows and Mac

Windows

  1. Windows 10 or later, 64-bit.
  2. Download the Windows installer from your order page, or later from your account. Run it.
  3. If your browser warns about the file, choose Keep.
  4. If Windows says it protected your PC, choose More info, then Run anyway.
  5. Stay online while it runs. It adds Microsoft's WebView2 Runtime if your PC needs it.
  6. FIRST PRESS installs as a VST3 in C:\Program Files\Common Files\VST3.
  7. Rescan plug-ins in your DAW, then load it as an effect.
  8. If its window still opens blank, install Microsoft's WebView2 Runtime, then open FIRST PRESS again.

Mac

  1. macOS 11 or later, on Apple silicon and Intel Macs.
  2. Download the Mac installer from your order page, or later from your account. Open it.
  3. If macOS says it can't check the installer, open System Settings, choose Privacy & Security, then Open Anyway.
  4. FIRST PRESS installs as a VST3 and an Audio Unit.
  5. In Logic Pro, rescan in Settings > Plug-in Manager. In other DAWs, rescan plug-ins.

Open FIRST PRESS and activate it in your browser, or with the serial from your account. Read the install guide.

If a warning says the file is damaged or contains a virus, do not run it. Email us instead. If the installer still will not open, email support@fatberrydsp.com with the plug-in name, your operating system and the exact message.

Formats, systems and licence

At a glance

Formats
Windows VST3 · macOS VST3 and AU
macOS
macOS 11.0 or later
Windows
Windows 10 or later, 64-bit (x86-64)
Mac architecture
Universal (Apple silicon and Intel)
Activation
Online, serial or offline, on up to 3 computers
Licence
Perpetual single-user licence
Version
1.0.0

Features

  • Transformer, Valve and Transistor circuits
  • Drive from 0 to 30 dB, with Output trimmed to match in the editor
  • Tone from -6 to +6 dB, a tilt around 700 Hz
  • Output from -24 to +12 dB
Show all 6
  • Mix from 0 to 100%, default fully wet
  • Mono or stereo, 44.1 kHz through 192 kHz

DAW setup

Installation help for 15 DAWs, including Ableton Live, Logic Pro, FL Studio, Cubase, Fender Studio Pro and REAPER.

See all 15 DAWs

Already own it? Download your installer

Free to keep, not a trial.

FIRST PRESS is one of 13 free plug-ins. No card, no time limit and no watermark on your audio. Use it on your own tracks and on client work, with free updates. Activate it on up to 3 computers.

See all 13 free plug-ins →

Three steps to your first sound

Free with a Fat Berry account. No card.

  1. Download the installer for your computer.The free licence and the installers stay together in your account.

  2. Rescan plug-ins in your DAW.

  3. Put it on a part you know.Switch it in and out while the part plays.

Before you download

Need help choosing or installing? Email support@fatberrydsp.com

What audio sources and mix tasks is FIRST PRESS best suited to?
Any track that wants a preamp on the way in, before EQ and compression.
How should I dial in and place FIRST PRESS in a signal chain?
Choose Transformer, Valve or Transistor, then set Drive. Tone darkens or brightens around 700 Hz. If the circuit is too much of the sound, lower Mix.
How does FIRST PRESS handle three preamp circuits?
Transformer, Valve and Transistor are separate original circuits: a loaded magnetic core, a common-cathode valve stage, and a common-emitter transistor stage. The switch is a three-position selector. A circuit change blends over 40 ms.
What controls and behaviour define FIRST PRESS’s drive, with the level held?
Drive runs from 0 to 30 dB. In the editor, turning Drive up turns Output down by the same number of decibels, so you hear the circuit instead of a jump in level. Output still has its own control, from -24 to +12 dB, when the level needs to land somewhere else.
What is happening under the hood of FIRST PRESS (Tone · Mix)?
Tone is a tilt around 700 Hz, from -6 to +6 dB, after the circuit. Mix runs from 0 to 100% and opens at 100%, the full circuit. Pull it back to set the dry signal beside the preamp.

Your basket is empty.