SECOND HELPING

Body, presence and air, kept under the peaks.

A level-dependent enhancer. Body, Presence and Air come forward below the peaks, and Amount sets how much.

Free

Free to keep with a Fat Berry account. Windows VST3 · macOS VST3 and AU.

No card · Free to keep · Up to 3 computers · Free updates

Hear it first ↓

Hear it

Press Play to hear it. Switch between Before and After while it plays.

0:00 / 0:00

A vocal, dry and with Body, Presence and Air brought up in SECOND HELPING.

After selected.

How it is built

Body, Presence and Air each run from 0 to 100%, and they open at 50%. Amount opens at 0, so the plug-in adds nothing until you turn it up. Each band asks for at most +6 dB, and the boost eases off on peaks. Air also eases off when the sound is sibilant. Output runs from -24 to +12 dB.

Enhancement under the peaks

SECOND HELPING adds body, presence and air where the signal is quieter, and reduces that extra gain on peaks. The correction is added to the original signal.

Amount opens at zero, so the plug-in adds nothing until you turn it up.

Specs and compatibility

Install on Windows and Mac

Windows

  1. Windows 10 or later, 64-bit.
  2. Download the Windows installer from your order page, or later from your account. Run it.
  3. If your browser warns about the file, choose Keep.
  4. If Windows says it protected your PC, choose More info, then Run anyway.
  5. Stay online while it runs. It adds Microsoft's WebView2 Runtime if your PC needs it.
  6. SECOND HELPING installs as a VST3 in C:\Program Files\Common Files\VST3.
  7. Rescan plug-ins in your DAW, then load it as an effect.
  8. If its window still opens blank, install Microsoft's WebView2 Runtime, then open SECOND HELPING again.

Mac

  1. macOS 11 or later, on Apple silicon and Intel Macs.
  2. Download the Mac installer from your order page, or later from your account. Open it.
  3. If macOS says it can't check the installer, open System Settings, choose Privacy & Security, then Open Anyway.
  4. SECOND HELPING installs as a VST3 and an Audio Unit.
  5. In Logic Pro, rescan in Settings > Plug-in Manager. In other DAWs, rescan plug-ins.

Open SECOND HELPING and activate it in your browser, or with the serial from your account. Read the install guide.

If a warning says the file is damaged or contains a virus, do not run it. Email us instead. If the installer still will not open, email support@fatberrydsp.com with the plug-in name, your operating system and the exact message.

Formats, systems and licence

At a glance

Formats
Windows VST3 · macOS VST3 and AU
macOS
macOS 11.0 or later
Windows
Windows 10 or later, 64-bit (x86-64)
Mac architecture
Universal (Apple silicon and Intel)
Activation
Online, serial or offline, on up to 3 computers
Licence
Perpetual single-user licence
Version
1.0.0

Features

  • Body, Presence and Air, each 0 to 100%, default 50%
  • Amount from 0 to 100%, default 0, so it opens neutral
  • Level-dependent boost, at most +6 dB in a band, reduced on peaks
  • Air eases off during sibilance
Show all 6
  • Output from -24 to +12 dB
  • Mono or stereo, 44.1 kHz through 192 kHz

DAW setup

Installation help for 15 DAWs, including Ableton Live, Logic Pro, FL Studio, Cubase, Fender Studio Pro and REAPER.

See all 15 DAWs

Already own it? Download your installer

Free to keep, not a trial.

SECOND HELPING is one of 13 free plug-ins. No card, no time limit and no watermark on your audio. Use it on your own tracks and on client work, with free updates. Activate it on up to 3 computers.

See all 13 free plug-ins →

Three steps to your first sound

Free with a Fat Berry account. No card.

  1. Download the installer for your computer.The free licence and the installers stay together in your account.

  2. Rescan plug-ins in your DAW.

  3. Put it on a part you know.Switch it in and out while the part plays.

Before you download

Need help choosing or installing? Email support@fatberrydsp.com

What audio sources and mix tasks is SECOND HELPING best suited to?
Parts and mixes that need body, presence or air without lifting the peaks.
How should I dial in and place SECOND HELPING in a signal chain?
Leave Amount at 0 and you hear the source. Turn Amount up, then set Body, Presence and Air. The bands already ease off on peaks. Set Output last.
How does SECOND HELPING handle enhancement under the peaks?
SECOND HELPING adds body, presence and air where the signal is quieter, and reduces that extra gain on peaks. The correction is added to the original signal. Amount opens at zero, so the plug-in adds nothing until you turn it up.
What controls and behaviour define SECOND HELPING’s body, presence and air?
Each band runs from 0 to 100% and opens at 50%. Body follows a 300 Hz low band. Presence is the band between 300 Hz and 5 kHz. Air is high detail from about 8 to 18 kHz. A band asks for at most +6 dB. Air also eases off when the sound is sibilant.
What is happening under the hood of SECOND HELPING (Amount · Output)?
Amount scales the boost in every band and opens at 0. Output runs from -24 to +12 dB after the enhancement. Power Bypass is the top-right icon. It is separate from the host bypass.

Your basket is empty.