Studio Application 1
Mix engineers who want a consistent console workflow across 20 to 60 tracks without opening four separate plugin windows per channel.
Fat Berry DSP / Channel strip plug-ins Buying Guide
One channel. A clear signal path.
Channel strip plug-ins combine preamp drive, high/low-pass filtering, musical EQ, and dynamics into a single unified console signal path. Choose Berry Console to shape tracking channels, drum submixes, and full mix templates with zero multi-plugin window juggling and calibrated gain staging. Berry Console: Gate, EQ and compress a channel in one plug-in. Work down the channel in a deliberate order. Balance the recording first, shape a distracting frequency area, then control the peaks that keep the part from sitting in place. Match the output after each stage so you can hear which change helps. A single signal path makes that process easy to revisit when the arrangement fills out. Check the vocal against the rhythm section and keep the smallest combination of moves that gives it a stable place in the mix. Try every paid option free for 30 days on your own tracks.
Written & tested by Rory Browne (Founder & DSP Developer) · Last updated:
Compare 1 channel strip plug-ins
Use Cases & Fit
Who channel strip plug-ins are for — and how to choose
A channel strip is built for speed and holistic decision-making. Instead of reaching for a separate filter, saturator, compressor, and EQ, a well-voiced channel strip puts the essential stages under your fingertips so you listen to the whole track rather than staring at surgical curves.
Studio Application 2
Tracking and vocal engineers seeking integrated preamp saturation, filtering, EQ, and compression in one low-latency insert.
Studio Application 3
Producers building fast mix templates with repeatable gain staging and output trim.
At the desk
How do you choose and dial in channel strip plug-ins?
Understand the internal stage order
Filters and input drive shape the signal before it hits the dynamics detector, while EQ and output trim sculpt how the channel sits in the stereo bus.
Separate input drive from output volume
Push the input stage when you want console harmonic weight, then pull the output trim back by the exact same amount so your DAW fader resolution around 0 dB stays intact.
Engage only the modules the track actually needs
Just because a channel strip has drive, EQ, and compression does not mean every module needs to work hard on every track. Sometimes a high-pass filter and 2 dB of compression is the entire move.
Use consistent small moves across a group
Applying gentle filtering, 1–2 dB of tonal shaping, and light peak control across all drum or backing-vocal channels builds a cleaner mix than heavy rescue processing on the group bus.
Signal-chain placement
Insert in the very first slot of individual audio tracks or group buses as your primary tone, filter, and dynamics foundation.
Side-by-side specifications
Channel strip plug-ins comparison table
The specifications below come from the published catalogue and release metadata. All licences are perpetual single-user licences (3 machine activations, 14-day full refund window).
| Plug-in | Price (USD) | Formats | OS Support | Best For / Sonic Role | Walkthrough |
|---|---|---|---|---|---|
| Berry Console | $29.99 | VST3, AU | Windows 10 or later, 64-bit (x86-64) · 11.0 | Gate, EQ and compress a channel in one plug-in. | Watch demo ↗ |
How we test at -16 LUFS
Listening tests & common mix mistakes to avoid
Primary listening check
Bypass the entire channel strip at matched output loudness. The processed track should sound closer, better controlled, and more defined inside the full arrangement.
Four-step studio audition checklist
- Start with the input gain and high-pass filter to set a clean, level-staged foundation.
- Dial in dynamics to steady the performance before adding broad EQ boosts.
- Use the EQ bands with eyes off the screen, listening to how the track interacts with the vocal and drums.
- Set the final output trim so toggling the plugin bypass causes zero jump in perceived loudness.
Common mistakes when using channel strip plug-ins
- Boosting +6 dB on multiple EQ bands without trimming output gain, clipping downstream plugins.
- Driving the preamp stage hard on every single track until transient clarity is lost.
- Forgetting to engage the high-pass filter before the compressor on mic recordings with low-end rumble.
The tools
Channel strip plug-ins, made by Fat Berry.
Each card links to current formats, controls, demos and the live price on its product page.
Channel Strip
Berry Console
Gate, EQ and compress a channel in one plug-in.
Hear and inspect Berry Console ↗In-depth technical guides
Related production & mixing guides
Studio notes
Read it, then hear it.
Frequently Asked Questions
Channel strip plug-ins FAQ
Does Berry Console include a video and audio walkthrough?
Yes. You can watch the 74-second Berry Console video walkthrough and audition level-matched dry/processed audio stems on /plugins/berry-console and /demos/berry-console.
Can I use Berry Console across every track in a large DAW session?
Yes. Berry Console is engineered for efficient real-time DSP execution so you can run it across dozens of tracks and buses in Ableton Live, Logic Pro, Reaper, Cubase, or Pro Tools (via VST3/AU).
What is the advantage of a channel strip over separate EQ and compressor plug-ins?
A channel strip unifies gain staging, preamp harmonics, filtering, EQ, and compression in one calibrated window, cutting decision fatigue and keeping your focus on the whole mix.